© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-659BRV
10
9. You will need to configure the following:
•
Wireless LAN:
Select
Enable
for Wireless LAN.
•
Note:
Selecting
Disable
will disable the wireless functionality of the router and
will not allow wireless devices to connect.
•
Network ID (SSID):
The SSID is your wireless network name. Enter a unique
SSID. Choose something that you would easily identify when searching for
available wireless networks.
•
Channel:
It is recommended to leave this setting as
Auto
.
Note:
1. To protect your network from any unauthorized access, it is recommended to enable
wireless encryption.
2. The example below is for WPA-PSK/WP2-PSK (AES) security. If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If you wireless
adapters do not support WPA or WPA2, then select WEP.
3. WEP security only supports 802.11b/g speed of up to 54Mbps.
4. Once encryption is enabled on the router, each wireless computer or device must be
configured with the same encryption key.
10. Select the desired Authentication mode, select the Encryption type, enter characters
for your Preshared key and then click
Next
. For WPA-PSK or WPA2-PSK, the Preshared
key length is 8-63 characters ASCII or 64 HEX characters. Make sure to copy down your
Preshared key. You will need the Preshared key when you configure your wireless
computer or devices.
Содержание TEW-659BRN
Страница 1: ...TRENDnet User s Guide Cover Page...
Страница 97: ......