Trane TCONT 800 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 88

22 BAS-SVX080B-EN
The only supported mode is Host mode for Symbio 800. This allows a tech to connect to the
Symbio 800 over Wi-Fi, but doesn’t allow the Symbio 800 to join a customer network or support
unit to unit communications over the adapters.
When the Wi-Fi adapter is connected for the first time, Symbio 800 will automatically host a
wireless access point with no configuration required. Use the following credentials:
• Default SSID: Trane Wifi <serial number of Symbio 800>
• Default password (to join the hosted network): tracerwifi
• Default IP address: 198.80.18.65
• To join the host network, follow the procedure below.
Setup a Wi-Fi Network (Host Mode)
1. Navigate to the Wireless Configuration section from the left navigation bar: IIn nsstta alllla attiio on n > >
IId de en nttiiffiicca attiio on n a an nd d C Co om mm mu un niicca attiio on nss > > IIP P C Co on nffiig gu urra attiio on n..
2. Click E Ed diitt. In the W Wii--F Fii N Ne ettw wo orrkk section, select the check box to enable the network
connection, then click S Sa av ve e. You are now able to set up the Wi-Fi connection. Select the
S Se ettu up p W Wii--F Fii button. The W Wii--F Fii S Se ettu up p dialog opens.
3. In the M Mo od de e section, select H Ho osstt ((A Acccce essss P Po oiin ntt)).
4. Enter the IP Address for the Symbio 800 Wif-Fi interface (default is 198.80.18.65).
5. Enter an address for the Subnet Mask (default is 255.255.255.192).
6. Click N Ne ex xtt.
7. Enter a Network Name (SSID) — default is Tracer WiFi <serial number of Symbio 800>.
8. Enter a Password (default is tracerwifi).
9. Define the Channel of the hosted Wi-Fi network (default is 6).
10. Define the DHCP configuration. This establishes the range of IP address the Symbio 800 will
assign to clients that join the hosted network and the duration of each lease. Defaults are
shown in
Figure 8, p. 22 .
Figure 8. DHCP Configuration (Host Mode)
11. Click F Fiin niissh h.
To join the newly created Symbio 800 Host network, connect your computer to the created
Wi-Fi network and enter the password (default is tracerwifi). Once you have joined, type the IP
address of the Symbio 800 in a web browser. Then, enter a valid user ID and password to
interface with Symbio UI.
C Co on nffiig gu urriin ng g tth he e S Sy ym mb biio o 8 80 00 0 ffo orr C Co om mm mu un niicca attiio on nss