Trane TCONT 800 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 88

8 BAS-SVX080B-EN
Overview
The Symbio ™ 800 unit controller is a factory-installed, application specific, and programmable
controller designed to control chillers, air-handlers, and large-packaged HVAC equipment.
The optional user interface features a touch sensitive color screen that provides the facility
manager at-a-glance operating status, performance monitoring, scheduling changes, and
operating adjustments. Additional advanced features include automated controller backup, and
optional features such as secure remote connectivity, wireless building communications, mobile
device connectivity, and custom programming with expandable inputs/outputs (I/O).
N No otte e:: The Symbio 800 is factory mounted on a variety of equipment and supports different
displays (TD7 or TD12). Installations have different facotry programming and slightly
different Symbio UI screen views. This document often uses an IntelliPak rooftop in many
of the examples, but applies to a wide variety of equipment.
Symbio 800 Components
The Symbio 800 system controller is equipped with the components shown in the following
figure. The table that follows provides descriptions.
Figure 1. Symbio 800 components
Callout Number in
Figure Symbio 800 Components Description
1
Communication Link P1: RS-485 port configurable for BACnet MS/TP or Modbus RTU
2
Communication Link P2: Modbus Server (Trane approved and factory installed)
3 Communication Link P3: LLID Bus
4
4–pin IMC terminal block port
5
IMC pin connection on each side of the controller