Trane IntelliPak, Руководство по программированию

Страница: 24 / 88

24 RT-SVP011A-EN
Reports
Setting Up a Temporary Override
You can set up a temporary override by using the buttons in the Temporary Override area. The
default for temporary overrides is 2 hours 0 minutes. The maximum duration for a temporary
override is 99 hours 59 minutes. If more time is needed, consider setting up a permanent override.
1. Touch the Set to Expire button.
A check mark appears in the check box, the override icon becomes blue, and the Time
Remaining area appears.
2. Touch either the hours ( HH ) or minutes ( MM ) button, then use the up and down arrows to set
the override.
The HH and MM buttons, when pressed change by one increment. Press down on the buttons
to accelerate. A second touch of the (HH) or (MM) buttons will open the Analog keypad screen.
Touch the Apply or Save button to set the temporary override.
Override Summary
The TD7 has a built in override summary report that can be accessed in one of two ways:
The preferred method is to access the report by touching the Override Summary button located in
the top display area of each TD7 screen.
An alternate method is to touch the Override Summary button on the Reports screen.
Figure 18. Displaying the analog keypad screen
Keypad Icon
Touch the keypad icon to open the Analog
keypad screen.
Enter a value by tapping the numerals on the
keypad. Touch
Enter
to save and return to the
Override screen.
Analog Keypad Screen