TRADEDOR TD77DM, Руководство по установке

Страница: 20 / 44

Tradedor TD77DM & TD77SEL Installation Guide
(A) Security Locking Straps Type 1
1 Your straps will come attached to your barrel
(fig.8.1) .
2 Insert a large flat screwdriver or 10 pence piece
into the green slot (fig.8.2) and turn a quarter
turn anti-clockwise (fig.8.5) .
3 Remove straps from barrel and keep in a safe
place.
4 Press and hold the down button on receiver box
until it has travelled all the way to its bottom limit
and the barrel stops on its own.
5 Using the manual override handle, wind the barrel
Forwards (as if the door was going down) until
you have clear access to the rectangle cut outs
in the barrel
(fig.8.3) .
6 Place a tool box or equivalent in the opening
roughly 300mm to 500mm high and arrange your
step ladder/hop ups one at each end.
7 Carefully unwrap garage door curtain and
remove packaging.
8 With at least 2 people, feed the curtain over the
barrel and lower carefully into the guide runners so
the curtain sits on top of the tool box
(fig.8.9) .
9 Slide the straps on to the top slat of the curtain
making sure there is one each end 200mm in and
the rest evenly spread out across the barrel.
10 To reattach all straps, make sure the metal pins
on the back line up with the rectangle cuts in the
barrel
(fig.8.3 and fig.8.4) , place the strap flat
on the barrel (fig.8.5) and turn the green circle a
quarter turn clockwise (fig.8.6) .
11 There are optional fixing positions on the straps
for them to be screwed to the barrel (fig.8.6) .
These are not needed, but if you would like to do
this
PLEASE BE WARNED that no screws can be
secured 650mm from the head of the motor as
you will damage it! fig.8.3
fig.8.2
fig.8.1
19
10. Installing Curtain To Barrel
And Setting Motor Limits