TRADEDOR TD77DM, Руководство по установке

Страница: 35 / 44

Tradedor TD77DM & TD77SEL Installation Guide
Wiring As Follows:
Receiver Box Green 6 Block Terminal (fig. 12.5) :
L0 – Up wire from switch
L2 – Down wire from switch
L1 – Common wire for the supply to the switch
L1 – L3 Link wire between terminals
Rocker Switch (fig. 12.2) :
4 – Up wire
3 – Down wire from rocker switch
5 – Common wire for the supply to the switch
5 – 2 Link wire between terminals
To open rocker switch remove screws
Key Switch (fig. 12.4) :
Right Block 13 – Up wire
Left Block 14 – Down wire
Right Block 14 – Common wire for the supply to
the switch
Left Block 13 – Right Block 14 Link wire between
terminals
To open key switch remove screw then turn key
a quarter turn.
fig.12.5
fig.12.4
Hard Wired Rocker / Key Switch
(SAFETY EDGE, TYPE 1)
Fixing Options
Below Lintel Fixing:
Cut guide runners to measured height less 310 mm.
Limited Opening Fixing:
Measure from floor to highest point, deduct 310 mm and cut guide runners to size.
Behind Lintel Fixing:
Cut guide runners to measured height.
34