TRADEDOR TD77DM, Руководство по установке

Страница: 39 / 44

Tradedor TD77DM & TD77SEL Installation Guide
1 Mark the height you require your external
override to go through the wall and drill
a 22mm hole through the wall all the way.
2 Place the plastic tube into the hole from
the front with the plate flush against the
outside wall and mark the 4 holes for fixing
the plate.
3 Then go inside and mark the length to cut
off the plastic insert.
4 Remove from the wall, drill 4 fixings outside
and cut plastic tube to size then reinsert
in wall.
5 Insert universal joint at bottom of shaft into
the plastic tube end and mark 2 fixing holes.
6 Mark the length you need to cut the shaft to
make fit with stem.
7 Cut shaft to size and drill a 5mm hole in the
shaft so you can reapply clip to attach shaft
to stem.
8 Drill fixing holes for universal joint.
9 Attach shaft to stem with clip and place
universal joint into plastic tube and screw
to wall.
10 Remove lock and check to make sure the
unit turns.
External Manual Override
38