TOYOTA LAND
CRUISER
2010 -
TVIP V4
Preparation
REMOTE ENGINE STARTER (RES)
Page 1 of 27 pages
Issue: C 08/19/10
Part Number: PT398-60080
or
PT398-60101
NOTE:
Part number of this accessory may not be the same
as the part number shown.
Conflicts
Do not install into vehicles without RKE systems.
Recommended Sequence of Application
Item # Accessory
1 XM XM
Radio
2
TVIP
V2 Glass Breakage Sensor (GBS)
and/or
V4 Remote Engine Starter (RES)
Kit Contents
Item #
Quantity Description
1 1
Wire
Harness
2
1
RES ECU Bracket
3
1
Extra Large Wire Tie
Hardware Bag Contents
Item #
Quantity Description
1 1
RES
ECU
2 1
Gateway
ECU
3 1
Gateway
ECU
Bracket
4
1
M6 Tapping Screw
5 15
Wire
Ties
6 1
Waterproof
Sheet
7
2
Large Foam Tape (1sheet 2pcs)
8
1
Custom Double Stick Tape
9
2
Key Tag (English)
10 2
Window
Labels
(English)
11
2
Transmitter Labels (English)
12 1
Engine Room Warning Label (English)
13
2
Key Tag (Spanish)
14 2
Window
Labels
(Spanish)
15
2
Transmitter Labels (Spanish)
16 1
Engine Room Warning Label (Spanish)
17 1
Owner’s
Guide
Additional Items Required For Installation
Item #
Quantity Description
1
1
Black Electrical Tape
2 1
Harness Kit PT398-60090-RS for
LC Kit PT398-60080 ONLY see pg. 2
Recommended Tools
Personal & Vehicle
Protection
Notes
Safety Glasses
Safety Gloves
(Optional)
Vehicle Protection
Blankets, Parts Boxes
Special Tools
Notes
Techstream
Software version 4.00.017 or
later
Installation Tools
Notes
Screwdriver
#2 Phillips, Flat Blade Jeweler’s
Nylon Panel Removal Tool
e.g. Panel Pry Tool #1
Toyota SST # 00002-06001-01
Side Cutters
Torque Wrench
36 in•lbf (4.07 N•m)
88.5 in•lbf (10 N•m)
Utility Knife
Pliers
Clip Clamp Pliers
Tape Clear
Wrench 10mm
Socket
10mm, Extension, 10mm Deep
Special Chemicals
Notes
Cleaner
VDC Approved Cleaner
Glass Cleaner
Household Glass Cleaner
Legend
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this
accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:
•
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.)
•
Safety (eye protection, rechecking torque procedure, etc.)
•
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.)
•
Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.)
Please see your Toyota dealer for a copy of this document.
STOP:
Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY:
Use caution to avoid risk of
injury.
CAUTION:
A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT:
Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK:
This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE:
This mark indicates that torque is
related to safety.
