Toshiba e-STUDIO200L, Руководство по обслуживанию

Страница: 218 / 708

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 182
486 Laser Timing of auto-clearing of
polygonal motor pre-run-
ning rotation ALL 0
<0-2>
SYS Switches the polygonal
motor to the standby
rotation when a certain
period of time has
passed from the pre-
running. At this code,
the period to switch the
status to the standby
rotation is set.
0: 15 sec.1: 30 sec.
2: 45 sec.
*
This setting is effec-
tive when “0” or “2”
is set at 08-483.
1
488 Laser Setting of polygonal motor
type ALL 0
<0-3>
M Set the type of polygo-
nal motor.
0: 2-clock type
1: 3-clock type
2: 4-clock type
3: 4-clock type 1
489 Laser Polygonal motor rotation
number on standby ALL 5
<0-5>
M 0: 38,090.55 rpm
1: 35,000 rpm
2: 30,000 rpm
3: 25,000 rpm
4: 20,000 rpm
5: 10,000 rpm 1
490 Laser Polygonal motor rotation in
the energy saving mode ALL 0
<0-1>
M 0: Stopped
1: 10,000 rpm 1
491 Transfer Transfer charger bias cor-
rection (H) at duplexing ALL 149
<0-255>
M Corrects the transfer
charger bias output
value of the leading
edge area of paper at
duplexing. 1
492 Transfer Transfer charger bias cor-
rection (C) at duplexing ALL 139
<0-255>
M Corrects the transfer
charger bias output
value of the center area
of paper at duplexing. 1
493 Transfer Transfer charger bias cor-
rection (L) at duplexing ALL 128
<0-255>
M Corrects the transfer
charger bias output
value of the trailing
edge area of paper at
duplexing. 1
502 Image Error diffusion and dither
setting at photo mode PPC 1
<0-1>
SYS Sets the image repro-
duction method at
photo mode.
0: Error diffusion
1: Dither 1
503 User
interface
Default setting of density
adjustment PPC 0
<0-1>
SYS 0: Automatic
1: Manual (Center) 1
Setting mode (08) <e-STUDIO202L/232/282>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
05/11