•
Do not mow near drop-offs, ditches, steep banks
or water. Wheels dropping over edges can cause
rollovers, which may result in serious injury, death
or drowning.
•
Do not mow slopes when grass is wet. Slippery
conditions reduce traction and could cause sliding
and loss of control.
•
Do not make sudden turns or rapid speed changes.
•
Use a walk behind mower and/or a hand trimmer
near drop-offs, ditches, steep banks or water.
•
Reduce speed and use extreme caution on slopes.
•
Remove or mark obstacles such as rocks, tree limbs,
etc. from the mowing area. Tall grass can hide
obstacles.
•
Watch for ditches, holes, rocks, dips, and rises that
change the operating angle, as rough terrain could
overturn the machine.
•
Avoid sudden starts when mowing uphill because
the mower may tip backwards.
•
Be aware that loss of traction may occur going
downhill. Weight transfer to the front wheels may
cause drive wheels to slip and cause loss of braking
and steering.
•
Always avoid sudden starting or stopping on a
slope. If tires lose traction, disengage the blades and
proceed slowly off the slope.
•
Follow the manufacturer’s recommendations for
wheel weights or counterweights to improve stability.
•
Use extreme care with grass catchers or other
attachments. These can change the stability of the
machine and cause loss of control.
Sound Pressure
This unit has a sound pressure level at the operator’s
ear of 92 dBA, which includes an Uncertainty Value (K)
of 1 dBA.
The sound pressure level was determined according to
the procedures outlined in EN 836.
Sound Power
This unit has a guaranteed sound power level of 105
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 11094.
Vibration Level
Hand-Arm
Measured vibration level for right hand = 2.7 m/s
2
Measured vibration level for left hand = 3.3 m/s
2
Uncertainty Value (K) = 1.7 m/s
2
Measured values were determined according to the
procedures outlined in EN 836.
Whole Body
Measured vibration level = 0.75 m/s
2
Uncertainty Value (K) = 0.38 m/s
2
Measured values were determined according to the
procedures outlined in EN 836.
6
Содержание Z580-D Z Master 74266
Страница 65: ...Schematics g012068 Wire Diagram Rev A 65 ...
Страница 66: ...Notes 66 ...
