Toro Reelmaster 2000-D, Руководство по обслуживанию

Страница: 9 / 208

Rev. A Reelmaster 2000--D Page 2 -- 1 Product Records and Maintenance
Chapter 2
Product Records and Maintenance
Table of Contents
PRODUCT RECORDS 1 . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIVALENTS AND CONVERSIONS 2 . . . . . . . . . . .
Decimal and Millimeter Equivalents 2 . . . . . . . . . . . .
U.S. to Metric Conversions 2 . . . . . . . . . . . . . . . . . . .
TORQUE SPECIFICATIONS 3 . . . . . . . . . . . . . . . . . . . .
Fastener Identification 3 . . . . . . . . . . . . . . . . . . . . . . .
Standard Torque for Dry, Zinc Plated, and
Steel Fasteners (Inch Series) 4 . . . . . . . . . . . . . . .
Standard Torque for Dry, Zinc Plated, and
Steel Fasteners (Metric Fasteners) 5 . . . . . . . . . . .
Other Torque Specifications 6 . . . . . . . . . . . . . . . . . .
Conversion Factors 6 . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Records
Insert Operator’s Manual and Parts Catalog for your Re-
elmaster at the end of this chapter. Refer to Operator’s
Manual for recommended maintenance intervals. Addi-
tionally, insert Installation Instructions, Operator’s
Manuals and Parts Catalogs for any accessories that
have been installed on your Reelmaster at the end of
this section.
Maintenance
Maintenance procedures and recommended service in-
tervals for your Reelmaster are covered in the Opera-
tor’s Manual. Refer to that publication when performing
regular equipment maintenance. Several maintenance
procedures have break--in intervals identified in the Op-
erator’s Manual. Refer to the Engine Operator’s Manual
for additional engine specific maintenance procedures.
Product
Records
and
M
aintenance