Toro 34215, Руководство оператора

Страница: 54 / 80

1. Remove the dipstick from the filler neck of the
engine and wipe clean the dipstick with a rag
(
Figure 62 ).
g033511
Figure 62
1. Dipstick 2. Filler neck
2. Slowly pour 1.1 L (1.2 US qt) of the specified oil
into the crank case of the engine through the
filler neck (
Figure 62 ).
3. Insert the dipstick from the engine as shown in
Figure 63 .
Note:
Do not thread the dipstick into the filler
neck when checking the engine oil level.
g027234
Figure 63
1. Dipstick 3. Minimum oil level
2. Maximum oil level
4. Remove the dipstick from the filler neck and look
at the oil level in the dipstick (
Figure 62 ).
Note:
The engine oil level must cover between
the hatch marked areas on the dipstick ( Figure
62 ).
5. If the oil level is low, add the specified oil into the
engine until the oil level is between the hatch
marked areas on the dipstick.
Note:
Do not overfill the engine with oil.
6. Hand tighten the dipstick into the filler neck
(
Figure 62 ).
Servicing the Spark Plug
Service Interval: Every 100 hours
Spark Plug Specification
Spark Plug Type: NGK BR6HS, Champion RTL86C,
or equivalent
Removing the Spark Plug
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page 50) .
2. Remove the spark plug as shown in Figure 64 .
g033508
g008791
Figure 64
54