Toro 34215, Руководство оператора

Страница: 51 / 80

Lubrication
Lubricating the Grease
Fittings
Service Interval: Every 100 hours
Grease type: National Lubricating Grease Institute
(NGLI) grade #2 multi-purpose gun grease.
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page 50) .
2. Wipe the grease fittings clean with a rag ( Figure
57 ).
g027437
Figure 57
1. Wheel bearings (2) 3. Front axle pivot
2. Kingpin pivots (2) 4. Steering control pivot
3. Connect a grease gun to the fittings ( Figure 57 ).
4. Pump grease into the fittings until grease begins
to come out of the bearings.
5. Wipe up any excess grease.
Engine Maintenance
Servicing the Air Cleaner
Service Interval: Before each use or daily
Every 100 hours
Important:
Do not apply oil to the foam or paper
element.
Removing the Foam and Paper
Elements
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page 50) .
2. Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage
(
Figure 58 ).
g033510
Figure 58
1. Air-cleaner cover 4. Hold-down rod
2. Paper-filter element 5. Wing nuts
3. Foam element
51