Toro 34215, Руководство оператора

Страница: 12 / 80

Throttle Control
The throttle control (the red lever) is located at the left
side of the control console (
Figure 7 ).
g033346
Figure 7
1. Hour meter 3. Choke
2. Ignition switch 4. Throttle
Choke Control
The choke control is located at the left side of the
control console; you use it to help start a cold engine
(
Figure 7 ).
Note:
Do not start or run a warm engine with the
choke in the O
N
position.
•
Pull up on the choke control to set the choke to
the O
N
position.
•
Push down on the choke control to set the choke
to the O
FF
position.
Ignition Switch
The ignition switch is located at the left side of the
control console (
Figure 7 ).
Use the ignition switch to start and shut off the engine.
The ignition switch has three positions, O
FF
, O
N
and
S
TART
.
Note:
You must engage the parking brake to start
the engine.
Hour Meter
The hour meter is located above the ignition switch at
the left side of the control console (
Figure 7 ).
The hour meter records the number of hours that the
machine has operated.
Fuel-Shut-Off Valve
The fuel-shut-off valve is located at the front, right side
of the engine below the fuel tank (
Figure 8 ).
Note:
Close the fuel-shut-off valve when the machine
is not used for a few days, during transport to and
from the job site, or when the machine is parked
inside a building.
g033352
Figure 8
1. Fuel-shut-off valve (right side of the engine)
Parking-Brake Lever
The parking-brake lever is located above the platform
on the right side (
Figure 9 ).
•
To engage the parking brake, push the
parking-brake lever down.
Note:
The brake lever engages a parking brake
in the transaxle.
•
To release the parking brake, pull the lever up.
g025162
Figure 9
1. Drive-wheel-release lever 3. Park-brake lever
2. Platform
12