Topcon SR-3AR, Инструкция по эксплуатации

Страница: 77 / 140

- 66 -
4. Communication with Personal Computer
4.1 Communication Commands
The SR-LEDW/SR-UL2/SR-UL1R/SR-3AR can communicate with a personal computer. User
commands for creating a program for communication with a personal computer are described in
this section.
A list of the communication commands is shown below.
Communication
command
Function
RM Sets the instrument in the communication status (remote mode).
LM Sets the instrument in the stand alone status (local mode)
ST
The instrument is in the measurement status.
When measurement is done, return measurement results with text data.
SF
The instrument is in the measurement status.
When integral time is calculated, it returns integral time with text data.
When measurement is done, return measurement results with text data.
STB
Sets the instrument is in the measurement status.
When measurement is done, it returns measurement results with binary data.
Communication speed is faster than above
“ST” command. It is available via
USB divice only.
D0 Returns the colorimetric value and spectral radiance value.
D1 Returns only the colorimetric value.
A0 Set the measurement mode to AUTO mode
A1_#####
Set the measurement mode to FREQ mode. "#####" means frequency.
Unit: Hz
A2_#####
Set the measurement mode to MANU mode. "#####" means integral time.
Unit: ms
A3 Set the measurement mode to SYNC mode.
KW[n]_#### Writes the correction factors on the instrument. n: 0 ~ 400
KR[n]
Reads out the correction factors from the instrument.
n:0 ~ 400
KX_##### Writes the correction data for the tristimulus value X.
KY_##### Writes the correction data for the tristimulus value Y.
KZ_##### Writes the correction data for the tristimulus value Z.
KXR Reads the correction data from the tristimulus value X.
KYR Reads the correction data from the tristimulus value Y.
KZR Reads the correction data from the tristimulus value Z.
DR [n] Reads out the measurement data stored by the instrument.
K[
＊
]1
K[
＊
]2
Changes the setting for the correction factor in the instrument.
K[
＊
]1: For spectrum
K[
＊
]2: For tristimulus values
＊ = O: Changes the correction factor to “valid”.
＊
= N: Changes the correction factor to “invalid”.