Topcon SR-3AR Скачать руководство пользователя страница 5

Страница: 5 / 140

Safety Cautions

Warning

Do not operate the SR-LED in locations with inflammable or combustible vapors

such as gasoline.

Doing so may result in a fire.

Do not disassemble or modify the instrument.

Doing so may result in a fire or electric shock.

Do not use AC adapters other than those included or sold separately by TOPCON.

AC adapter failure may result in a fire or electric shock.

Do not disassemble the AC adapter.

Doing so may result in a fire or electric shock.

Remove dust and moisture from the plug of the AC adapter.

Doing so may result in a fire.

In the event the instrument should make an unusual sound or emit smoke,

immediately turn off the power and unplug the AC adapter.

Continuing to use the instrument may result in a fire.

In this event, consult with your retailer or TOPCON TECHNOHOUSE.

Caution

Do not look directly at bright objects such as the sun or bulb filaments.

Doing so may result in optical damage.

Do not place the SR-LED on unstable or unsteady surfaces.

Doing so may result in the instrument falling or tipping over.

Do not plug or unplug the instrument with wet hands.

Doing so may result in electric shock.

Use only specified screws when using the tripod screw and screw holes for jig
attachment.

Do not tighten the screws any more than necessary. Doing so might cause internal
breakage.

Mandatory

Prohibited

Mandatory

Prohibited

Mandatory

Содержание SR-3AR













































































































































Результаты поиска

Содержание SR-3AR

Отзывы:

Похожие инструкции для SR-3AR

Бренды по названию

Популярные бренды

Topcon SR-3AR, Инструкция по эксплуатации

Результаты поиска

Содержание SR-3AR

Отзывы:

Похожие инструкции для SR-3AR

Бренды по названию

Популярные бренды