Topcon SR-3AR, Инструкция по эксплуатации

Страница: 64 / 140

- 53 -
3.12
Displaying and Editing the Correction Factor
In the function mode, you can set whether the correction factors are used or not and set
the correction factors of tristimulus values XYZ.
■
Setting whether the correction factors are used or not
1 Switch to the function mode to display the
[FACTOR]-[FACTOR ON/OFF].
☞
'3.1.2 Entering/Returning from the Function Mode'
＊ Ｆａｃｔｏｒ ＯＮ／ＯＦＦ ＊
Ｆａｃｔｏｒ（１ｎｍ）＝＊ＯＦＦ
Ｆａｃｔｏｒ（ＸＹＺ）＝＊ＯＦＦ
2 To change the setting, press the [CHANGE] switch. The right part of "Factor (1 nm) =" blinks.
＊ Ｆａｃｔｏｒ ＯＮ／ＯＦＦ ＊
Ｆａｃｔｏｒ（１ｎｍ）＝＊ＯＦＦ
Ｆａｃｔｏｒ（ＸＹＺ）＝＊ＯＦＦ
3 When the [ROTATION] switch is pressed in this
condition, the blinking item is changed,
OFF
→
ON
4 Press the [ENTER] switch to decide the setting. The right part of "Factor (XYZ) =" blinks.
＊ Ｆａｃｔｏｒ ＯＮ／ＯＦＦ ＊
Ｆａｃｔｏｒ（１ｎｍ）＝＊ＯＦＦ
Ｆａｃｔｏｒ（ＸＹＺ）＝＊ＯＦＦ
5 When the [ROTATION] switch is pressed in this condition, the blinking item is changed,
OFF
→
ON
6 Press the [ENTER] switch to decide the setting.
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE ROTATION
SHIFT