Tomey TMS-5 Скачать руководство пользователя страница 197

Страница: 197 / 216

6-3

● The measurement data of the model eye is not correct.

The surface of the model eye is dirty.

Check that the surface of the model eye

is clean. If dirty, clean the surface using

an applicable cleanser and perform

measurement again.

The model eye is misaligned.

If the X, Y, and Z offset values are large,

correct measurement data cannot be

obtained. Move the model eye to make

the offset value as small as possible,

capture an image, and check the data

again.

● The analysis data cannot be printed by the printer.

The printer connection cable is faulty.

Check that the printer connection cable

is firmly connected to the personal

computer and printer.

Or, check that the cable is not damaged.

Printer driver error

Check that the Windows® printer driver

selected on your personal computer

is suitable for the printer actually

connected. Select the correct printer

driver.

Содержание TMS-5

























































































































































































































Результаты поиска

Содержание TMS-5

Отзывы:

Tomey TMS-5, Инструкция по эксплуатации, Страница: 197 / 216

Результаты поиска

Содержание TMS-5

Отзывы: