Tomey TMS-5, Инструкция по эксплуатации

Страница: 16 / 216

1-4
When moving the head and/or chin rest of the instrument, pay attention to the
position of the patient's face, hands, and fingers. The patient may be injured by
any moving sections of the instrument.
Only use the ring cone of this main unit. Otherwise, the correct corneal shape
or curvature cannot be obtained. The number attached to the ring cone must
be identical to the number attached to the inside of the main unit which can be
seen when the ring cone is detached.
Do not look directly at the laser beam when performing alignment in ring topo
mode. Otherwise, the patient may suffer vision damage.
Do not allow any person to place their hands or fingers in the clearance under
the head or the section under the chin rest of this instrument. Their hands or
fingers may be caught and injured.
Be careful not to touch the patient, personal computer, and monitor
simultaneously. Do not allow the patient to touch the connection terminal.
Do not lean on the instrument or press the instrument from the top. The
instrument may topple over, resulting in mechanical failure or injuries.
Peel off the top sheet of chin paper and clean the forehead pad with a clean
cloth before capturing an image of the next patient. Clean the forehead pad
and chin rest with a cloth dampened with alcohol as needed.
If any smoke, offensive odor, or abnormal sound occurs, turn off the instrument
immediately, disconnect the power plug from the outlet, and contact our local
distributor or Tomey Corporation.
„
Precautions after operation
Do not place any container with liquid in it on the instrument. Any liquid
entering the instrument may cause electric shock or failure.
Do not use organic solvents such as thinner, benzene, or acetone to clean the
instrument. Fire or electric shock may occur. (These solvents may also corrode
the resin or coating on the cover of the instrument.)
Follow the specified procedures to return the operation switch, dial, etc. to their
original positions and turn the instrument off.
Hold the plug when disconnecting the power cord from the outlet to avoid
placing excessive force on the cord. Pulling the cord may damage the inner
core wires, resulting in electric shock or fire.
When disconnecting cords, do not apply too much force to them, for example,
do not hold and pull the cord.