TMC TMC 1000E, Руководство по эксплуатации

Страница: 118 / 182

Injection Molding Machine Chapter 5
V3.0
5-13
Content of Alarm Cause of Alarm Release of Alarm
73.
Under mold adjust
mode
S / A : Mold adjusting function
not off
1.
Open safety gate
2.
Turn off mold adjusting
function
76. S
afety door #3 rear be
open I/O 110
S / A : No.3 safety gate not
closed
1.
Open safety gate
2.
Close No.3 safety gate
77.
Safety door #4 rear be
open I/O 201 S / A : No.4 safety gate not
closed
1.
Open safety door
2.
Close No.4 safety door
78.
Safety door #5 rear be
open I/O 205
S / A : No.5 safety gate not
closed
1.
Open safety gate
2.
Close No.5 safety gate
89. Hyd. Safety valve
monitor device is
opened
M / S / A : After operation door
is closed
I/O 109 not ON
1.
Open safety gate
2.
Check safety valve monitor
device
92. Core in not completed
before clamp close
M : Core-in operation not
completed
1. O
pen safety gate
2.
Perform manual core in
3.
Check corepull device
93.
Core out not
completed before
clamp open
M: core –out operation not
completed.
1.
Open safety gate
2. P
erform manual core out
3.
Check corepull device
97.
Machine not
maintenance
M/S/A: maintenance cycle
reached.
1.
Press alarm buzzer button
2.
Switch to manual mode
3. Do maintenance procedure
4. Press F8 on maintenance log
screen