Temperature Measurement & Face Recognition Terminal User Manual
Notes on Safety
◼
This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/1 A, no more than 2000m
altitude of operation and Tma=60 Deg.C.
◼
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
◼
There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
◼
Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage
to product.
◼
Do not use corrosive detergent to clean main body of the camera. If necessary, please use
soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for
high grade furniture is applicable.
◼
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
◼
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
◼
Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
◼
Keep away from heat sources such as radiators, heat registers, stove, etc.
◼
Do not expose the product to the direct airflow from an air conditioner.
◼
This manual is for using and managing the product. We may reserve the rights of
amending the typographical errors, inconsistencies with the latest version, software
upgrades and product improvements, interpretation and modification. These changes will
be published in the latest version without special notification.
◼
All pictures, charts, images in this manual are only for description and explanation of our
products. The ownerships of trademarks, logos and other intellectual properties related to
Microsoft, Apple and Google belong to the above-mentioned companies.
◼
This manual is suitable for face recognition network cameras.
