31
Temperature Measurement & Face Recognition Terminal User Manual
1. Enable the applicable detection that’s desired.
Scene Change Detection
: Alarms will be triggered if the scene of the monitor video has
changed.
Video Blur Detection
: Alarms will be triggered if the video becomes blurry.
Enable Video Color Cast Detection
: Alarms will be triggered if the video becomes obscured.
2. Set the alarm holding time and alarm trigger options. The setup steps of alarm trigger
options are the same as temperature measurement settings. Please refer to temperature
measurement settings chapter for details.
3. Click “Save” button to save the settings.
4. Set the sensitivity of the exception detection. Click “Sensitivity” tab to go to the interface
as shown below.
Drag the slider to set the sensitivity value or directly enter the sensitivity value in the textbox.
Click “Save” button to save the settings.
The sensitivity value of Scene Change Detection
: The higher the value is, the more sensitive
the system responds to the amplitude of the scene change.
The sensitivity value of Video Blur Detection
: The higher the value is, the more sensitive
