10
Temperature Measurement & Face Recognition Terminal User Manual
temperature alarm and save the images on an SD card.
Trigger SD Recording
: If selected, video will be recorded on an SD card on detecting
abnormal temperature alarm.
Trigger Email
: If “Trigger Email” and “Attach Picture” are checked (email address must be
set first in the Email configuration interface), the captured pictures and triggered event will be
sent into those addresses.
Trigger FTP
: If “Trigger FTP” is checked, the captured pictures will be sent into FTP server
address. Please refer to FTP configuration chapter for more details.
4. Click “Save” to save the settings.
3.2 Face Match Configuration
The setting steps are as follows.
1. Go to Config
→
Face
→
Face Match Config interface.
2. Enable “Save Source Information” or “Save Face Information”.
Save Source Information: if checked, the whole picture will be saved to the SD card when
detecting a face.
Save Face Information: if checked, the captured face picture will be saved to the SD card when
detecting a face.
Note
: To save images to the local PC, please enable the local smart snapshot storage first
(Config
→
System
→
Local Config). To save images to the SD card, please install an SD card
first.
3. Set alarm holding time and alarm trigger options.
3. Set face comparison options.
