44
Temperature Measurement & Face Recognition Terminal User Manual
2. Enter user name in “User Name” textbox.
3. Enter the password in the “Password” and “Confirm Password” textbox. Please set the
password according to the requirement of the password security level (Go to
Config
→
Security
→
Security Management
→
Password Security interface to set the security
level).
It is recommended to set a high level password that shall be composed of numbers, special
characters, upper or lower case letters for your account security.
4. Choose the user type. Administrator has all permissions. Normal user can only view the live
video. Advanced user has the same permissions as an Administrator except for; user, backup
settings, factory reset, and upgrading the firmware.
5. Enter the MAC address of the PC in the “Bind MAC” textbox.
If this option is enabled, only the PC with the specified MAC address can access the camera for
that user.
6. Click the “OK” button and then the newly added user will be displayed in the user list.
Modify user:
1. Select a user to modify password and MAC address if necessary in the user configuration list
box.
2. The “Edit user” dialog box pops up by clicking the “Modify” button.
3. Enter the old password of the user in the “Old Password” text box.
4. Enter the new password in the “New password” and “Confirm Password” text box.
5. Enter computer’s MAC address as necessary.
6. Click the “OK” button to save the settings.
Note
: To change the access level of a user, the user must be deleted and added again with the
new access level.
Delete user:
1. Select the user to be deleted in the user configuration list box.
