26
Headlamp
Turn the lamp switch handle to turn
on the following lamps.
Position 1 – Front position lamp, rear
position lamp, license plate lamp, and
instrument panel lamp.
Position 2 – Low beam , besides the
above-mentioned lamps.
Notice
To
prevent
the
excessive
discharge of the battery, do not
turn on the lamps for a long
period while the engine is not
running.
High beam – Low beam – To shift
to high beam, turn on the headlamp
and push the handle to far position
of the driver (position 1). Pull the
handle towards the driver to shift to
low beam (position 2).
In such case, the high beam
indicator lamp on the instrument
cluster will inform the driver that
the high beam is turned on.
High beam flasher (position3) -
Push backward the handle to turn on
the high beam and release the
handle to turn off the high beam.
When the handle is at “OFF”
position, the high beam flasher still
can function.
Turn signal lamp
To issue the turn signal, push
upward or downward the turn signal
lamp handle to position 1.
The key must be turned to “ON”
position.
The handle can automatically return
after the turn. In addition, it can
return the handle with hand after the
26
