66
Notice
The start should not last for
over 10 seconds, which will lead
to overheating of engine and
wiring system.
Engine’s rotary speed should
not be over-high in cold state.
To immediately examine and
repair the engine in the even of
engine start trouble or frequent
engine kill.
ü
ü
ü
üü
ü
ü
ü
Safety inspection before
departure
It is important to conduct safety
examination prior to drive, which
will assure safety and pleasant drive.
It is a must to have full knowledge
to automobiles, which is regarded
as a prudential opinion. Therefore,
you must regularly examine your
automobile at
Designated workshop.
Warning
To assure sufficient ventilation in
the
event
of
examining
automobile in sealed garage,
because the exhaust gas emitted
from engine is toxic.
Prior to engine start
Automobile outside
Tire: to inspect tire pressure through
pressure gauge and carefully check
if tire is lacerated, damaged, or over
worn.
Wheel: to assure that nuts have not
missed or loosened.
Liquid leakage: To check if fuel,
engine oil, water, or other liquids at
the bottom of vehicle are leaked
(water leakage from air conditioner
is normal).
Lamps: To assure head lamp, brake
lamp, tail lamp, turn signal lamp,
and other lamps should be in normal
work, as well as examine head
lamp’s lightening direction.
Automobile inside
Spare tire, jack, and wheel nut
spanner: To check spare tire’s tire
pressure and assure that jack & tire
nut spanner are equipped.
Safety belt: To check whether safety
belt can be safely locked and assure
safety belt has not been worn.
Meter and control switch: To assure
the normal work of indicator lamps,
meter lamp, and defrosting facility.
Brake: to assure brake pedal has
sufficient clearance.
Engine counterpart
Spare fuse: to assure there is spare
fuse
All fuses with designated rated
67
