73
“START” place for 10 seconds
while depressing accelerator pedal,
and then you should attempt to start
engine on the precondition of not
depressing accelerator pedal.
In the event that you still fails to stat
the engine within 10 seconds,
please take out the key and attempt
to start the engine several minutes
later.
In the event that you still fails to stat
the engine, you should regulate or
repair the engine, and you can call
Designated workshop
for support.
Notice
Do not continue starting the
engine for over 10 seconds, which
may lead to overheating of engine
or circuit system.
(c)Lapping start
In the event of power failure, you
can start the engine through the
accumulators in other vehicle.
To guard against accumulator
explosion, acid scalding, electrical
burning, or damaged electric
components’ danger to people &
vehicle, you should strictly follow
the rules below:
You should enquire
Designated
workshop
in the event that you have
little
knowledge
to
the
implementation of the following
rules.
Warning
●Accumulator
electrolyte
contains noxious substances and
erosive vitriol.
●To wear protective spectacles
while conducting lapping start,
and to prevent vitriol from
splashing on skin, clothes, or
vehicle.
●In the event that acid splashes
on clothes or eyes, you should
put off your clothes and clean
eye with water, and then you
should go to hospital for medical
treatment. If necessary, you
should wash the hurt place
through cotton cloth or sponge.
●In the event that fire or spark is
closed to the accumulator, a kind
of gas will be emitted, which will
lead to gas explosion. Therefore,
only lapping cables should be
adopted
for
lapping
start,
smoking and fire are forbidden
during the process.
Notice
Accumulator voltage for
lapping start should stay at 12V,
and lapping start can be
conducted after confirming that
accumulator voltage is normal.
74
