101
Do not operate engine without
air cleaner, or the engine damage
will be accelerated.
Be cautious of the frame of the
screen wiper because it may
damage glass surface.
Please check if articles (like
tools and dishcloth) are left
before
closing
the
engine
compartment cap.
ü
ü
ü
üü
ü
ü
ü
Checking engine oil
level
Turn off the engine at the normal
work temperature, and examine the
oil level by oil lever gauge
1.To accurately measure the oil
level, please park the automobile on
horizontal road, and wait for several
minutes after turning off the engine,
in order to make oil return to the
engine bottom along the tube.
2.Take off the oil lever gauge, and
clean it with dishcloth.
3.Insert the oil lever gauge back.
4.Take off the oil lever gauge again,
and examine the oil level.
Warning
Keep away from the hot exhaust
manifold
In the event that the oil level stays
below or is slightly higher than the
lower limit, please inject the same
type of engine oil.
Open the oil filter cap; fill a small
amount of engine oil every time and
examine the oil lever gauge until the
oil level stays between the upper
limit and lower limit of the oil lever
gauge.
After
the
oil
level
meets
requirement, install the oil filter cap
and tighten it.
Notice
Prevent the engine oil from
overflowing, or the engine will
be damaged.
Check the oil level in the wake
of filling the engine oil.
ü
ü
ü
üü
ü
ü
ü
Checking engine
coolant level –
Examine the transparent coolant
tank when the engine is in cold
Upper limit
Lower limit
While
refueling
Much
102
