16
Three-point type
Adjust the seat to the proper
position (front seats), sit upright and
lean against the backrest, pull out
the seat belt and buckle it.
When the spring bolt is locked in
the buckle, you could hear the
sound of “click”.
The seat belt may automatically
adjust the length to fit for your
stature and seat position.
When use emergency brake, or
impact occurs, the retractor will
lock the seat belt. If you tilt forward
too fast, it may also lock it. You
may elongate the seat belt by slowly
and steadily pulling, which will
make you move about freely.
When the seat belt cannot pull out
from the retractor, you may tighten
it a little, and then release, the seat
belt could be pulled out from the
retractor smoothly.
Warning
When inserting the spring
bolt, you shall ensure that it is
locked in the buckle, and the seat
belt is not twisted.
Do not insert the coin or clip into
the buckle hole, for this will prevent
the spring bolt from locking in it.
If the seat belt does not work,
please
contact
Designated
workshop immediately. You shall
not use the seat before its seat belt is
repaired, for it cannot provide
protection for the adult and child.
Adjust the seat belt at the lap and at
the shoulder
The lap belt shall be near to the
crotch as much as possible. Do not
put it on the waist; then, pull up the
shoulder belt to adjust to the
position which is cleaved to the
body through locking plate.
eliminate
loose
over high
near to the crotch as
low as possible
16
