7
instrument
panel
whose
temperature may become high.
Do not dismantle it.
Do not use other object to knock
it, or throw it.
Do not put the emitter in the
water.
If the wire remote control emitter
cannot operate the doors, or cannot
work within the normal distance,
you shall:
Check whether it is near other
wireless signal emitting area. The
wireless signal emitted from radio
station or air port may effect its
normal operation.
Check its battery. It may be dead.
Replace the emitter battery
Please use CR1616 lithium battery
or its equivalent to replace the
battery.
Replace the battery according to the
following steps:
1
Use the tool to open the key cover,
take out the emitter from the key.
2
Use the tool to open the emitter
cover, take out the battery, put the
new battery in the emitter, with the
anode
+
upwards.
3
Latch on the emitter cover. Put
the emitter back to the key, and
latch on the key cover.
Note
ƽ
Make sure that the anode
and cathode of the emitter
battery is in correct direction.
7
