36
key during the normal traveling.
“ACC”: Some accessories (such as
radio) can function, but the engine
is not running.
“LOCK”: The engine is not running
and the steering wheel is locked.
Only in this position can the key be
pulled out.
Only by pushing inward and
rotating the key can rotate the key
from “ACC” position to “LOCK”
position.
During the engine start, sometimes
the key seems like being blocked at
the “LOCK” position and can’t be
rotated. To rotate the key, firstly
determine whether the key is fully
inserted and then try to rotate the
key while lightly rotating the
steering wheel.
Warning
Do not pull out the key during
the traveling, or the steering
wheel will be locked to cause
direction out of control.
Notice
When the engine is not running,
do not place the key at “ON”
position, which will lead to the
discharge of battery and damage
of ignition switch.
ü
ü
ü
üü
ü
ü
ü
Manual shift system
The gears of the transmission are
shown in the figure above.
Conduct the gearshift while fully
depressing the clutch pedal and then
slowly release the clutch pedal.
During the traveling, do not rest the
foot on the clutch pedal, or it will
result in the fault of the clutch. To
park the car on the upslope, use the
parking brake instead of the clutch
to control the car.
Good driving habits
●If it’s difficult to shift to reverse
gear, shift the transmission to
neutral gear, immediately release
the clutch pedal, and then try again.
Notice
Before shifting to the reverse
gear, make sure that the car is
completely stopped.
36
