YoURReceiveR
P3
e
nglish
WARninG:
Indicates warning information.
noTe:
Indicates any other additional important or helpful information.
MenU
Represents a button on the remote control or the receiver.
(boldcharacters)
Move
to
Represents a menu item within a screen.
(
Italic
Characters
)
1.4Accessories
y
y
User Manual
y
y
1 Remote control unit
y
y
2x Batteries (AAA type)
y
y
1x Adaptor 12 Volt DC, 2 Ampere
y
y
1x infrared extender
WARninG:
The batteries should not be recharged, disassembled, electrically short-circuited, be mixed
or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we recommend using
(e.g. NiMH) types with low self-discharge to ensure long time operation of remote control.
1.5UsageofexternalUsbdevices
y
y
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB
2.0 specifications, recording, timeshift and playback with your receiver might not work properly.
y
y
If you are going to use external USB HDD (Hard Disk Drive) please consider that it might be the
case that the power specifications exceed the supported output of your receiver (5V/1A). If so,
please connect your USB HDD to an according external power adapter.
y
y
THOMSON cannot guarantee compatibility with all types of USB storage devices.
y
y
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
THOMSON will not take responsibility for any loss of information or circumstances caused by
loss of information.
y
y
Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB
device via your receiver, refer to chapter
7.4.5hDDManager
for details.
2.0YoURReceiveR
2.1DefAULTPin-coDe:0000
2.2frontPanel
Fig.1
1.
standby/onbutton
Turns the receiver ON or into Standby
2.
P-/P+buttons
Switches to the previous/next programme
3.
v-/v+buttons
Reduces or increases the volume level
4.
iRsensor
Receives the RCU commands
5.
WhiteLeDDisplay
Displays channel number, time, videotext page or PVR modes
6.
RedindicationLeD
Indicates that receiver is currently in power saving mode
7.
smartcardslot
To insert your Irdeto Smart card
noTe:
5 min after switching the receiver to standby it enters the deep sleep mode. Within this time
the receiver is able to start up quickly. Starting up from deep sleep takes approx. 1 min.
