17
TC5-8SDA rev.03
TC5-8SDA
Turn the adjustment knob clockwise one notch further. The
maximum temperature flashes on the display, alternating with
the letters "
Hi
".
Turn the adjustment knob clockwise a third notch. The room
temperature is displayed again.
For each individual probe, press the push-button. The tempera-
ture reading from probe x is displayed, alternating with the
letters "
Pr x
" and the on/off state of the probe.
Turn the adjustment knob clockwise by one notch. The minimum
temperature is displayed, alternating with the letters "
Lo
".
Turn the adjustment knob clockwise one notch further. The
maximum temperature is displayed, alternating with the letters
"
Hi
".
Turn the adjustment knob clockwise a third notch. The probe
temperature is displayed again.
Press the push-button to access the other probes, etc.
NOTE
: If you let the display flash for more than 10 seconds, the
controller resets the minimum and maximum temperatures currently in
memory (the display stops flashing to indicate that the reset has been
done).
