35
TC5-8SDA rev.03
TC5-8SDA
1
Viewing Relative Humidity
Set the selection knob to
ROOM HUMIDITY - SET-
TINGS.
The current relative
humidity is displayed as a
percentage.
Turn the adjustment knob
clockwise by one notch. The
minimum humidity flashes on
the display, alternating with
the letters "
Lo
".
Turn the adjustment knob clockwise one notch further. The
maximum humidity flashes on the display, alternating with the
letters "
Hi
".
Turn the adjustment knob clockwise a third notch. The room
humidity is displayed again.
NOTE
: If you let the display flash for more than 10 seconds, the
controller resets the minimum and maximum humidity currently in
memory (the display stops flashing to indicate that the reset has been
done).
2
Adjusting Humidity Set Point
The set point determines when dehumidification is activated. It can
be adjusted from 40 to 100% relative humidity.
Set the selection knob to
ROOM HUMIDITY - SETTINGS
. The
current relative humidity is displayed as a percentage.
Press the push-button. The humidity set point is displayed,
alternating with the letters "
SEt
" and "
rH
".
Use the adjustment knob to adjust the set point to the desired
value.
