48
TC5-8SDA rev.03
TEST MODE
A test mode allows you to simulate temperature changes and verify
controller performance. In test mode, the temperature probe inputs
are turned off, allowing the user to change the temperature used by
the controller to operate the stages. The controller operates as
before using the new temperature settings. Both the room tempera-
ture and the outside temperature can be adjusted in this way.
To enter test mode:
Turn the selector knob to the
ROOM TEMPERATURE
. The
current room is displayed.
Press and hold the push-button for 5 seconds. The letters "
TST
"
are displayed, alternating with the room temperature.
Turn the adjustment knob to adjust the room to the desired
value. To adjust the outside temperature, turn the selector knob
to
OUTSIDE T°
. The controller operates the stages according to
the new temperature settings.
To exit test mode:
Turn the selector knob to the
ROOM TEMPERATURE
position.
The current room is displayed.
Press and hold the push-button for 5 seconds.
NOTE:
If no user activity is recorded after 5 minutes in test mode,
the controller resumes normal operation.
