Theta Digital Casablanca IV, Руководство пользователя

Страница: 46 / 97

45
MODE Function
Pressing the MODE button (shaded in figures 17 and 18) once displays the first page of the MODE menu. This first
page consists of 6 different signal ‘processing’ modes, one of which can be selected and temporarily applied to the
currently selected input signal, when applicable. A
right
arrow is displayed in the lower right corner of the VFD indicating
that there is an additional MODE page. Pressing the A-D button once will reveal the second page all consisting of
additional modes. Figure 15 shows the first MODE page, and figure 16 shows the second.
Note : This menu allows the user to audition different modes when possible. It does not store the changed mode. When
a different INPUT SELECT button is pressed, or the Casablanca IV is powered down, the MODE will revert to its default
for that INPUT SELECT button. Each INPUT SELECT button can have its own default MODE , the default mode for
each INPUT SELECT is set in the SETUP / INPUT menu. Please refer to page 60 (Default Mode) for information on
setting the MODE for an INPUT SELECT button.
* * *
Figure 17 - Front Panel Display of the MODE
Page 1
Menu
Press button 1 - 6 to select the desired mode. The corresponding LED above buttons 1 through 6 will illuminate.
Each of the 6 modes shown
in figure 14 are described below:
Pro Logic IIx outputs 5.1, 6.1 or 7.1 channels from 2-channel or 5.1 channel sources, incorporating the best elements of
Dolby Digital, Dolby Digital EX and Dolby Pro Logic II.
Dolby Pro Logic IIx Movie ( MOVIE ). Intended to be used with 2-channel TV sources and will create 5.1, 6.1 or 7.1 output
channels. Movie mode is the reference decoder mode for any such surround-encoded program.
Dolby Pro Logic IIx Music (
MUSIC ). The Music mode is for use with stereo recordings and provides a wide and deep
sound space. The Music mode balances the multi-channel surround sound field to content that was not specifically
encoded for surround playback. The Music Mode includes controls that allow additional sound tailoring. These include
Center Width and Panorama Mode, which are both discussed in the Setup Dolby Digital section of this manual.
Dolby Pro Logic IIx Matrix (
MMATX ). This mode is intended to enhance an incoming mono signal or make a poor
incoming FM signal more listenable by forcing it into mono.
DTS Neo:6 was designed to provide a richer and more natural surround sound experience from 2-channel sources. It
outputs 5.1, 6.1 or 7.1 channels. An incoming Neo:6 signal can be encoded as either Matrix or Discrete.
DTS Neo:6 Cinema (
CINE ). This is intended to be used with a 5.1 or 6.1 channel source and will output 5.1, 6.1 or 7.1
channels.
DTS Neo:6 Music (
MUSIC ). This mode will take an incoming 2-channel source and output 5.1 or 7.1 channels or take
in incoming 5.1 source and output 7.1. It is intended to be used with any 2-channel or 5-channel source. It preserves
the integrity of a stereo mix while
augmenting it with a center to anchor the image, and derive enough sound content to
yield a spacious, three dimensional listening experience. Music Mode includes a user adjustable variable called CGAIN ,