manualshive.com logo in svg

Theta Digital Casablanca IV, Руководство пользователя

Поделиться
Скачать
Theta Digital Casablanca IV Скачать руководство пользователя страница 3

ii

PREFACE 

CONGRATULATIONS 

 

You have just acquired the most advanced component for the control and processing of audio and video ever to 
have been developed. 

 

IMPORTANT 

 

Save all packaging in a dry place away from fire hazards.  Your Casablanca IV is a precision electronic instrument 
and should be properly packaged any time shipment is made.  In the unlikely event that you have to return your 
Casablanca IV to the factory for service, or if you send it to us for updating, the original packaging will best protect 
the unit from shipping damage. 

 

In order to achieve the fullest flexibility and enjoyment from your Casablanca IV, we at Theta recommend that you 
read this manual in full before connecting the unit to your audio/video system. 

 

WARNING 

 

United Stated law prohibits disposition of these commodities to Libya, Laos, North Korea, Cambodia or Cuba 
unless otherwise authorized by the United States. 

 

NOTE: 

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC rules.  These limits are designed to provide reasonable protection against harmful interference in 
a  residential  installation.   This equipment  generates,  uses and can  radiate radio  frequency energy  and,  if  not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does 
cause harmful interference to radio and television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

 

  *  Reorient or relocate the receiving antenna. 
  *  Increase the separation between equipment and receiver. 
  *  Connect the receiver into an outlet on a circuit different from that which the Casablanca IV is connected to. 

 

Acknowledgments 

 

Casablanca IV is manufactured under license from Dolby Laboratories.  “Dolby”, “Pro Logic”, “Dolby TrueHD” 
and the double-D symbol are registered trademarks of Dolby Laboratories.   

 

Casablanca  IV  is  manufactured  under  license  from  Digital  Theater  Systems,  Inc.  U.S.  Pat.  No's.  5,451,942; 
5,956,674;  5,974,380;  5,978,762;  6,226,616;  6,487,535  and  other  U.S.  and  world-wide  patents  issued  and 
pending.  "DTS", "DTS-ES", "DTS-ES", "Neo:6", "DTS 96/24" and “DTS Master Audio” are trademarks of Digital 
Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc.  All Rights Reserved. 

 
 

©

 2000-14 Theta Digital. All rights reserved. 

 

 

This manual is also available for download as a PDF file at Theta Digital’s website. http://www.thetadigital.com 

 

No  part  of  this  publication  may  be  reproduced  or  transmitted  in  any  form  or  by  any  means,  electronic  or 
mechanical, for any purpose, without the express written permission of Theta Digital. 
 
 
 

Содержание Casablanca IV


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды