143
Thermo Fisher Scientific
Operation Manual HM550
• Clean and disinfect the cryo chamber according to the respective
applicable lab regulations.
• Unscrew the hand wheel handle for transportation.
Note:
To make sure that these is no condensation water inside the chamber, let the
instrument approx. 48 h dry.
• Loosen the fastening screws of the rollers to move the instrument.
• Arrange the dismounted accessories into the intended transporta-
tion packing.
Note:
Before the further transportation, tighten the fastening screws so that the
instrument does not move during transportation.
• Slightly tilt the cryostat and insert the foam parts underneath it.
• Place the case over the instrument.
• Insert the wooden cover.
• Attach the tightening strips around the packing.
After the final shutdown of the instrument, we recommend to contact
a local recycling company for the disposal according to the national ap-
plicable regulations.
To be applied in the countries of the European Union and other Eu-
ropean countries with a separate collecting system within the waste
management.
e marking of the product and/or the respective literature indicates
that, after its final shutdown, it must not be disposed of together with
ordinary domestic waste.
• Please dispose of your instrument separately from other waste to not
harm our environment and/or human health by uncontrolled waste
disposal.
• Recycle your instrument to support the sustainable recycling of
material resources.
• Industrial users should contact their suppliers and observe the
conditions of the contract. is product must not be disposed of
together with other commercial waste.
• Please contact your supplier!!
Disposal of the
instrument after final
shutdown
Conditions for the transportation of the instrument
Disposal of the instrument after final shutdown
