108
Thermo Fisher Scientific
Operation Manual HM550
e cycle can be aborted at any time by
•
Pressing the Reset button (Fig. 113.8).
Note:
At the end of the Cold D cycle, remove all debris from the chamber. If any
ice has formed on the cryobar, it is easily removed by spraying with alcohol.
In addition to the instant use automatic Cold D cycles can be pro-
grammed. Follow the directions below to activated (or deactivate) the
automatic Cold D.
• Press the Menu button (Fig. 113.9) to access the submenus listed.
• Next, use the arrow keys (Fig. 115.5 and 115.6) to select the re-
quired submenu from the list.
• Press Enter (Fig. 113.10) to open the selected submenu.
• Select the required operation (Fig. 114.5 and 114.6) and press Enter
to confirm.
• Press the Menu button (Fig. 113.9) to exit the list of submenus or
select another submenu using the arrow keys (Fig. 114.5 and 114.6).
e following submenus on the list are relevant to programming the
Cold D cycle:
• Use the arrow keys (Fig. 114.5 and 114.6) to select the required set-
ting in this submenu (Fig. 116).
• Press Enter (Fig. 113.10) to confirm.
Programming Cold D
Interrupting Cold D
Ver. 2.09
Figure 115.
Starting the Cold D (Option DC).
“OPT. DC Oꢁ/OFF” submenu
Operating instructions
Cold D (Option DC)
