Textron Jacobsen Ransomes Parkway 3 Meteor LGNN344, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 57 / 236

en-57
6 CONTROLS
A
Y
X
Z
B
B
A
C
D
E
6.9 LIGHTING KIT (Optional) _______________________________________________
Lighting control Stalk
A Push away from operator to turn main beam on.
B Pull towards operator to flash headlights.
C Move stalk up to indicate right turn.
D Move stalk down to indicate left turn.
E Push stalk in to sound horn.
NOTE: Side lights will operate when ignition is in the run
position
When the lighting kit is fitted a brake light function is
available. If brake lights are used rear view mirrors must be
fitted.
6.10 SEAT RIGHT HAND ARM REST & POD ___________________________________
The right hand arm rest of the seat has an extension
mounted to it which carries the control pod.
To obtain a comfortable operating position:
a Release hand wheel (A).
b Using both hands grip the arm rest and lift or
lower the arm rest. It will move in a circular
motion (X) either moving up and forward or down
and rearwards.
c When the desired position is obtained lock by
tightening the hand wheel (A).
The pod can be pivoted in the horizontal plane (Y),
independently of the arm rest by:
d loosening the three screws holding the pod to the arm
rest extension.
e Swivel pod to desired position.
f Tighten the three screws.
The whole arm rest extension can be pivoted in the
horizontal plane (Z).
g Remove the arm rest cushion by removing the four
screws (B).
h Loosen the three locknuts fitted to studs.
j Swivel the arm rest extension to the desired position.
k Replace arm rest cushion and secure with screws.
CAUTION
When access is needed, under the seat plate.
Ensure that the armrest is at its highest
maximum travel and that the seat is fully
retracted. Slacken the 3 screws on the underside
of the control pod and rotate towards the steering
column. The seat can now be lifted. This reduces
the risk of the control pod being damaged.