Textron Jacobsen Ransomes Parkway 3 Meteor LGNN344, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 46 / 236

en-46
6 CONTROLS
6.2J.4 MAIN RUN SCREEN _________________________________________________
The main screen for operation gives the operator all the information
necessary to operate the machine. No operator input to view standard
data is needed when you use the mower.
If an error occurs when the operator has moved away from this
screen, it immediately returns to this screen.
When a button is pressed, a bar is shown at the bottom of the screen
to give more options.
Buttons numbered left to right.
Button 1: Screen Brightness and Contrast
Button 2: Up Arrow (Changes time, from hour meter to time of day)
Button 3: Down Arrow (Changes time, from time of day to hour meter)
Button 4: Enters the Menu structure.
If there are no more buttons pressed, the button bar disappears.
Symbol Description
The fuel sensor controls the left hand bar graph on the main screen,
Once the fuel level has dropped below the 25% level the icon below will start to flash.
When only the last two units are left a larger icon will replace the central icons and flash and
the red LED’s will flash five times every five seconds.
The water temperature sensor controls the right hand bar graph on the main screen. The bar
graph has four segments, at normal operating temperature that is 85° C the bar graph will be
two units above centre.
If the temperature rises to 110°C then both RED LED's will start flashing and a larger tempera-
ture symbol will replace the central icons and flash. The buzzer will be sounded twice every
four seconds. If the Blades are running they will stop and the lift lower function will be inhib-
ited. At 115°C the engine will shut down.
The Parking brake icon is for indication purposes only. When the icon is shown the parking
brake is engaged. If the operator leaves the seat without applying the parking brake it will
engage after three seconds.
Indicates condition of the PTO
This will not trigger a fault until the hydraulic oil has reached operating temperature. If the
charge filter becomes blocked the icon will be shown, and the RED LED’s will flash at a rate of
a one second flash every five seconds. The buzzer will be sounded at the same rate for 1sec-
ond every 5 seconds
If the engine oil pressure drops, this will activate the oil pressure icon on the display, if the
engine is running, i.e. Alternator voltage is seen, then after five seconds BOTH RED LED's will
start flashing and a larger icon will replace the central icons and flash. This will also trigger the
buzzer once every four seconds. If the engine is running then the fault will be logged, informa-
tion stored is:
1.Low Engine Oil Pressure, 2.Date, 3.Time, 4.Engine Hours, 5.Length of time engine continued
to run after fault arose.
The Hour meter will be shown, and the hours will be number of running engine hours.
1234.5