TEXIO STW-9000 Series Скачать руководство пользователя страница 15

Страница: 15 / 113

HIGH VOLTAGE
output terminal

HIGH VOLTAGE

CAUTION

5.0 kVAC MAX.

6.0 kVDC MAX.

The HIGH VOLTAGE terminal output is
used for outputting the testing voltage. The
terminal is recessed for safety. This
terminal is used in conjunction with the
RETURN terminal.

WARNING

USE EXTREME CAUTION.
Do not touch the HIGH VOLTAGE terminal during testing.

RETURN terminal Except STW-9904

RETURN

The RETURN terminal is used for IR,
DCW and ACW tests.

RETURN, SENSE
and SOURCE
terminals

Only STW-9904

SOURCE H

SENSE H

SOURCE L

SENSE L

GB Rx

RETURN

HI-POT

The RETURN terminal is used for IR,
DCW and ACW tests.
The SOURCE H, SOURCE L, SENSE
H and SENSE L terminals are used
for GB tests.

Scroll wheel

The scroll wheel is used to edit parameter
values.

UTILITY key

UTILITY

Used to enter the MANU Utility or Common
Utility menu.

EDIT/SAVE key

EDIT/SAVE

Used to start editing MANU/AUTO tests as
well as save settings and parameters.

MANU/AUTO key

MANU/AUTO

The MANU/AUTO key is used to select
manual tests (MANU) or automatic tests
(AUTO).

REMOTE terminal

REMOTE

The REMOTE terminal is used to connect
to a remote controller.

STOP button

STOP

The STOP button is used to stop/cancel
tests. The STOP button will also put the
safety tester in the READY status to begin
testing.

Содержание STW-9000 Series


















































































































Результаты поиска

Содержание STW-9000 Series

Отзывы:

TEXIO STW-9000 Series, Инструкция по эксплуатации, Страница: 15 / 113

Результаты поиска

Содержание STW-9000 Series

Отзывы: