Chapter 9: Split Screen
139
Split-screen display with both x-y plots and stat plots
Some screens are never displayed as split screens. For example, if you press
z
in
Horiz
or
G-T
mode, the mode screen is displayed as a full screen. If you then press a key that displays either
half of a split screen, such as
r
, the split screen returns.
When you press a key or key combination in either
Horiz
or
G-T
mode, the cursor is placed in the
half of the display to which that key applies. For example, if you press
r
, the cursor is placed
in the half where the graph is displayed. If you press
y
0
, the cursor is placed in the half
where the table is displayed.
The TI-84 Plus will remain in split-screen mode until you change back to
Full
screen mode.
Horiz (Horizontal) Split Screen
Horiz Mode
In
Horiz
(horizontal) split-screen mode, a horizontal line splits the screen into top and bottom
halves.
The top half displays the graph.
The bottom half displays any of these screens.
•
Home screen (four lines)
•
Y= editor (four lines)
•
Stat list editor (two rows)
•
Window editor (three settings)
•
Table editor (two rows)
Moving from Half to Half in Horiz Mode
To use the top half of the split screen: