TESTO 300 XXL, Инструкция по эксплуатации

Страница: 6 / 80

Minimum system requirements
• PC with operating system
- Microsoft Windows 95 or better (if applicable)
- Microsoft Windows NT 4, Service pack 4, or better
(if compatible).
- Windows 2000 or better (if compatible).
• CD Rom drive
• Pentium 100 MHz
• 32 MB RAM
• 15 MB hard disk drive space free
• Free serial interface (COM) or corresponding adapter.
6
Application of analysis software
Analysis software is used to save, read out and analyse separate
readings and measurement series and to configure the control
unit and the
testo 300 XXL
analysis box. Graphic presentation of
the readings is the main task of this program.
Readings are taken using Testo analysers and are transmitted to
the PC via serial software. Also the configurations set in the PC,
such as display sequence, alarm limits are updated via the same
interface in the
testo 300 XXL
measuring instrument. Data is
read out using analysis software which activates the interfaces
making all the functions available.
Readings are logged with date and time. The values are shown
constantly during online measurements.
There are suitable instrument drivers for every Testo
instrument/system, which can be installed. They are specially
adapted to the performance range of the instruments and their
operation.
Application / System requirements
Preparation
Software version
You will see which software version you are using in the main
menu “
?
” under “
Info
”.
The description is valid for
• Analysis software from 3.1