TESTO 300 XXL, Инструкция по эксплуатации

Страница: 42 / 80

42
Control unit
Settings register
Deleting device memory
1. Click on “Actions”.
2. Click on “Delete device memory”
button. The question “Do you really want
to delete the memory?” appears.
3. All of the data in the memory is
deleted if you answer with “
Yes
”.
4. The data is retained if “
No
” is pressed.
Entering parameters for volume flow measurement
(pressure, area, Pitot tube factors).
1. Click on “
+
” in front of “
Parameters”.
The sub-menus appear.
2. Pressure: Enter altitude, barometer
value and differential pressure.
Absolute pressure is shown.
3. Area: Select area and enter
dimensions.
4. Pitot tube:Enter Pitot tube factor and
offset factor.
5. Press the “
OK
” button. All of the
modifications are applied and
transmitted to the control unit.