TESTO 300 XXL, Инструкция по эксплуатации

Страница: 36 / 80

36
Control unit
Measuring program register
Entering measuring program
1. Click on the
“Measuring program”
register
2. Select the location in the
“Location
name”
menu.
3. Enter the duration of the
measurement series in the
“Times”
menu.
- Mark hour and/or minute with the
left mouse button and enter a value.
4. Enter a value in the
“Stop condition”
menu. The required measurement
series is carried out within the time
specified.
5. Save the data from the register card
via
“Apply”
. Modifications are no longer possible.
6. The data is saved via
“OK”
and the instrument driver window
is closed.
7. Open the context menu for the instrument driver with the
right mouse button and select
“Close”
.
“Slave Mode”
is
cancelled.
8. Measuring begins once the
“Start”
button on the control unit
is pressed.
Deleting measuring program
The input menus are released once the
“Delete program”
button is activated.
Note
Once the
“Apply”
button is activated in the
“Measuring
program”
register, it is not possible to make any more entries
in the
“Settings”
register.
Entries can be made in the
“Settings”
register once the
“Delete program”
button in the
“Measuring program”
button is activated.