TESTO 300 XXL, Инструкция по эксплуатации

Страница: 46 / 80

46
1. Open the sub-menu using the right mouse button.
2. Select “
Close
”. “
Slave Mode
” on the
testo 300 XXL
control unit display disappears and
the
testo 300 XXL
can again be operated via the
keypad.
Note
Configurations on the PC are saved in
testo 300 XXL
.
They can be configured at any time.
Control unit
Barcode
Cancelling the control unit
Sub-directories, in which locations can be found, can be
accessed via the control unit. There are some restrictions when
making these sub-directories legible via barcodes:
An internal key and not the displayed location is coded in the
printed barcodes. The required locations have to be input in the
control unit beforehand in order to be able to use this key. If this
does not happen, the internal key is displayed in the control unit
instead of the location name.
The locations are suitable for barcodes regardless of how they
are produced:
Production type Suitable for barcode
Archive via "New location" No
Comsoft instrument, "New location" Yes
Instrument "New location" Yes
Barcode If this location has
already been entered,
yes, otherwise no