TESTO 300 XXL, Инструкция по эксплуатации

Страница: 44 / 80

44
Online configuration
1. Click on
testo 300 XXL:
Control unit
Open the sub-menu via the right mouse button or
click on the “
Instrument
” main menu
2. Click on
“Online Configuration”
. The window to set the
measuring cycle opens and the number of channels is shown.
3. Enter the required measuring cycle in sec, min, h
and confirm with
“OK”
. The measuring cycle is saved.
4. Leave the menu by clicking on “
Cancel
” and the existing data
is retained.
Online measurement
1. Click on
testo 300 XXL:
Control unit
Open the sub-menu with the right mouse button or click on
the “
Instrument
” main menu
2. Click on
“Online”
.
3. Online measurement is started via
“Start”
. The measurement
data is displayed.
4. You can vary the type of display via the following symbols in
the menu bar:
Diagram
Table
Digit box
Histogram
5. Click on the
“Instruments”
menu, Online/stop if you wish to
end the measurement.
6. Use the following icons to save or print online measurement
data:
Save
or
Print.
Control unit
Online measurement