Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 167 / 204

Custom Tasks
The system includes eight Custom tasks: Custom 1, Custom 2, Custom 3, Custom 4, Custom 5,
Custom 6, Custom 7, and Custom 8. You must enter all of the settings for a Custom task manually using
Modify
. The system performs the task using the settings you enter, but the system does not save those
settings for future use. However, you can configure the default settings for each Custom task. For more
information about configuring the default settings, see the Quantum Cell Expansion System
Administrator’s Guide. Table 13-1 shows the settings for all the Custom tasks.
Table 13-1: Factory defaults and setting options for all of the Custom tasks
Setting Factory Default Setting Options
IC Inlet None Cell, Reagent, IC Media, Wash, EC Media, None
IC Inlet Rate 0 mL/min 0 to 500 mL/min
IC Circulation Rate 0 mL/min −300 to 300 mL/min
EC Inlet None Reagent, IC Media, Wash, EC Media, None
EC Inlet Rate 0 mL/min 0 to 300 mL/min
EC Circulation Rate 0 mL/min −300 to 300 mL/min
Outlet EC Outlet EC Outlet, IC Outlet, IC and EC Outlet, Harvest
Rocker Stationary (0°) In Motion (−180° to 270°, 0 to 3600 sec), Stationary
(−180° to 270°)
Stop Condition Manual Manual, Time (0.1 to 21600 min), IC Volume
(1 to 4000 mL), EC Volume (1 to 4000 mL), Empty Bag
The following example explains how to select, setup, and start a Custom task:
1. Touch
Task
.
2. Touch
Custom
.
3. Touch
Custom 1
.
The Setup Confirmation screen appears for Custom 1.
4. Touch
Modify
to select the settings for the task. Table 13-1 shows all the possible setting options for
all of the Custom tasks.
5. Touch
Start
.
6. Check the status line to confirm that the task has started.
When the system completes the task, the home screen appears, the system changes to an idle state,
and the status line displays Idle.
Custom Tasks
13-2 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1