Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 109 / 204

9. When the screen prompts you to connect the sampling coil, open the incubator door, remove the
sample coil strain relief from the rocker assembly by lifting one tab, and uncoil the existing sample
coil from the rocker assembly.
10. Remove the sample coil strain relief from the line.
11. Use a sterile tubing welder to attach the end of the sampling coil accessory set that has a filter to one
end of the existing sample coil.
12. Use a sterile tubing welder to attach the remaining end of the sampling coil accessory set to the
remaining end of the existing sample coil.
13. Open the sterile welds.
14. Connect the sample coil strain relief to the sample coil line.
15. Recoil the sample coil around the rocker assembly.
16. Connect the sample coil strain relief to the rocker assembly.
17. Close the incubator door.
18. Touch
Next
.
The system continues the task, and the system updates the Connect Sampling Coil status screen and
the status message at each step throughout the task. When the system completes the task, the home
screen appears, the system changes to an idle state, and the status line displays Idle.
Set Management Tasks
7-14 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1